TIESELX Cable Raceway Cord Cover Kit – Paintable PVC Wire Channel for Wall-Mounted TVs

TIESELX Cable Raceway Cord Cover Kits are self-adhesive PVC channels built to hide the tangle of cords hanging behind a wall-mounted TV, computer setup, or home theater system. Each hinged channel snaps open so you can lay cords inside, then closes with a clean, low-profile finish that blends into any wall. No drilling, no wall patching, and no electrician required — just peel, stick, and press.

Because the raceway is fully paintable, you can match it to your exact wall color for a nearly invisible, built-in look. TIESELX raceways are available in two channel sizes and three pack lengths, so you can outfit a single TV drop or an entire home office and media wall with the same modular system.

Why TIESELX Cable Raceways Outperform Ordinary Cord Covers

Many cord covers use thin, brittle plastic or weak adhesive that peels away from the wall within weeks. TIESELX raceways are molded from UL94 V-0 fire-retardant PVC that stays rigid, holds its shape when cut, and grips firmly to clean, painted drywall. The included connector hardware — couplings, corner elbows, and T-fittings — lets you route cords around corners and outlets instead of forcing a single straight run, so the finished install actually looks intentional rather than improvised.

Key Features

• Peel-and-Stick Installation: Pre-applied adhesive backing mounts to walls, baseboards, and floors without screws or drilling.
• Hinged Snap-Close Channel: Lay cords inside and press the cover shut for a fully enclosed, finished look.
• Cuttable to Length: Trim sections with scissors or a small handsaw to fit any room layout.
• Fully Paintable Surface: Accepts standard latex or acrylic paint so the raceway can disappear against your wall color.
• UL94 V-0 Fire-Retardant PVC: Rigid, durable material built for long-term indoor use.
• Complete Connector System: Couplings, L-shaped elbows, and T-fittings are included to join sections and turn corners cleanly.
• Two Channel Sizes: Choose Small for 1-2 cords or Medium for 2-4 cords, depending on your bundle.

Technical Specifications

Material	PVC, UL94 V-0 fire-retardant rated
Color	White (paintable to match any wall)
Small Channel Size	0.59 in W x 0.4 in H (interior), holds 1-2 cords
Medium Channel Size	0.96 in W x 0.57 in H (interior), holds 2-4 cords
Mounting Method	Peel-and-stick adhesive backing, no drilling required
Cuttable	Yes — trim with scissors or a small handsaw
Paintable	Yes — accepts standard latex and acrylic paint
Pack Options	8-piece, 20-piece, or 40-piece kits
Recommended Surfaces	Smooth, clean interior walls, baseboards, and floors

Package Quantity & Size Options

Variant	Approx. Total Coverage	Cord Capacity
Small – 8-Piece Kit	116 in (8 sections)	1-2 cords
Small – 20-Piece Kit	315 in (20 sections)	1-2 cords
Small – 40-Piece Kit	630 in (40 sections)	1-2 cords
Medium – 8-Piece Kit	116 in (8 sections)	2-4 cords
Medium – 20-Piece Kit	315 in (20 sections)	2-4 cords
Medium – 40-Piece Kit	630 in (40 sections)	2-4 cords

Common Applications

• Wall-mounted TV power, HDMI, and soundbar cords
• Home theater and media wall cable runs
• Home office and dual-monitor desk setups
• Network, modem, and router cable concealment
• Baseboard-level cord runs in living rooms and bedrooms
• Classrooms, conference rooms, and office cubicles
• Gaming console and streaming device wiring

What’s Included

Every TIESELX Cable Raceway kit includes the raceway channel sections for your selected pack size, with adhesive backing pre-applied. Each kit also includes a matching set of connector hardware — straight couplings to join sections, L-shaped elbows for corners, and T-fittings to split a cable run — plus a printed quick-start instruction sheet. Cables, paint, and mounting tools are not included.

Installation & Usage Instructions

1. Plan your cord path from the device to the outlet and measure the sections you need.
2. Wipe the wall with a clean, dry cloth (or an alcohol wipe) to remove dust and oils so the adhesive bonds properly.
3. Cut raceway sections to length with scissors or a small handsaw if needed.
4. Peel the adhesive backing from each section and press firmly along the wall, baseboard, or floor path.
5. Open the hinged channel, lay your cords inside, and snap the cover closed.
6. Use the included couplings, elbows, and T-fittings to join sections, turn corners, or split off a second cord run.
7. Optional: paint the raceway to match your wall color once installed for a seamless, built-in look.

Care & Maintenance Instructions

Wipe the raceway clean with a soft, dry or lightly damp cloth as needed — avoid harsh solvents or abrasive cleaners, which can dull the paintable finish. Apply firm, even pressure when installing to maximize adhesion, and allow the adhesive to set for a few hours before adding heavier cord bundles. TIESELX raceways are designed for smooth, sealed interior surfaces; adhesion may be weaker on heavily textured, wallpapered, or unsealed walls. If you need to reposition a section, remove it slowly and evenly to minimize any impact on the wall finish.

Benefits

• Creates a clean, professional-looking cord installation without hiring an electrician.
• Helps protect kids and pets from loose, dangling, or exposed cords.
• Protects cables themselves from foot traffic, pets, and accidental tugging.
• Paintable design blends into any wall color instead of standing out.
• Modular couplings and fittings adapt to corners, splits, and longer runs.
• No-drill installation means no wall damage or patching when done carefully.

Why Choose TIESELX

TIESELX designs cable management products around everyday problems: cords that tangle, walls that look cluttered, and installations that take longer than they should. Every Cable Raceway kit uses fire-retardant PVC and a strong adhesive backing tested for reliable, long-term hold, paired with a full set of connectors so your installation looks finished instead of makeshift. It’s a straightforward system backed by a brand focused on practical, everyday cable organization.

Frequently Asked Questions

1. How many cords can each raceway size hold?
The Small channel comfortably holds 1-2 cords, while the Medium channel is sized for 2-4 cords, such as a power cable, HDMI cable, and speaker wire together.

2. Does this work on textured walls?
It works best on smooth, clean, sealed surfaces. On heavily textured, unsealed, or wallpapered walls, the adhesive may not bond as strongly.

3. Can the raceway be cut to fit a specific length?
Yes. Each section can be trimmed with scissors or a small handsaw to match your exact cord path.

4. Will removing it damage my paint?
When removed slowly and carefully, most painted walls are unaffected. On very fresh paint or delicate finishes, minor touch-up may be needed after removal.

5. What comes included in the kit?
Each kit includes raceway sections with adhesive backing, straight couplings, L-shaped corner elbows, T-fittings, and a printed instruction sheet.

6. Can I paint the raceway a different color?
Yes. The PVC surface is designed to accept standard latex and acrylic paint so it can match your wall.

7. What is the difference between the pack sizes?
The 8-piece kit covers about 116 inches, the 20-piece kit covers about 315 inches, and the 40-piece kit covers about 630 inches, so you can choose the coverage that matches your project.

8. Is professional installation required?
No. The peel-and-stick design is made for simple do-it-yourself installation without special tools or electrical work.