TIESELX Stainless Steel Cable Clamps – Rubber Cushioned Insulated P-Clips for Wire, Pipe & Conduit Installation (20-Pack)

Durable Stainless Steel Cable Clamps for Every Wiring & Plumbing Project

The TIESELX stainless steel cable clamp is built for anyone who needs a dependable way to route and secure wiring, hoses, pipes, or conduit. Each rubber cushioned cable clamp pairs a corrosion-resistant 304 stainless steel band with a soft rubber lining, creating an insulated cable clamp that grips firmly without scratching or crushing the surface it holds. From rewiring a classic car’s harness to organizing cables in a marine engine bay or mounting a conduit strap run in a home workshop, this cable clamp strap delivers a clean, professional finish that lasts for years.

Why Choose TIESELX Rubber Cushioned Cable Clamps

Marine-Grade Stainless Steel Body

Machined from premium 304-grade stainless steel, this stainless steel pipe clamp resists rust, salt spray, and everyday corrosion, making it a smart choice for automotive, marine, and outdoor projects. The band stays strong and rigid even after long-term exposure to moisture, oil, and temperature changes.

Soft Rubber-Lined Interior

Every wire holder clamp in this lineup includes a flexible rubber cushion bonded to the inside of the band. This rubber lined clamp design absorbs vibration, prevents chafing, and shields wires, hoses, and tubing from wear, keeping your installation protected for the long haul.

Adaptable P-Style Profile

The P-shaped body of this cable management clamp can be twisted and reshaped by hand during installation, so you can route wires and pipes around tight corners or uneven mounting surfaces without any special tools.

Key Features

• 304 stainless steel body for long-term rust and corrosion resistance
• Bonded rubber cushion lining reduces vibration, noise, and surface wear
• P-style loop design bends and twists easily for flexible mounting
• Pre-punched mounting hole sized for standard 1/4 inch (M6) screws or bolts
• Available in 13 individual sizes from 3/16 inch to 2 inch inner diameter
• Sold in a value-packed set of 20 clamps per size

Benefits

• Keeps wiring, hoses, and pipework neatly organized and off the floor or ground
• Reduces the risk of abrasion, short circuits, and pipe fatigue caused by loose lines
• Stands up to humid, salty, or oily environments better than plain steel or plastic clamps
• Fast, tool-light installation speeds up wiring and plumbing projects
• Reusable, reshapeable design lets you reposition clamps as projects change

Applications

• Automotive wiring harnesses, fuel lines, and under-hood tubing
• Marine and boat wiring, bilge hose, and rigging support
• Industrial machinery cable and conduit strap routing
• Home, workshop, and garage electrical cable clamp installations
• HVAC, irrigation, and plumbing tube clamp support
• Solar panel cable and conduit clamp mounting

Technical Specifications

• Material: Premium 304 stainless steel band with bonded rubber cushion insert
• Finish/Color: Stainless steel exterior with black rubber lining
• Mounting hole diameter: approximately 1/4 inch (6.5 mm), fits standard M6 screws or bolts
• Available inner diameters: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/4″, 1-1/2″, 1-3/4″, and 2″
• Band width (including rubber cushion): approximately 15 mm on standard sizes
• Pack quantity: 20 clamps per size
• Style: Household and industrial grade P-clip

Note: Mounting screws are not included. Each clamp is designed to accept standard 1/4 inch (M6) hardware.

Installation Instructions

1. Select the correct clamp size so the inner diameter matches the outside diameter of your wire, hose, or pipe.
2. Position the cable clamp strap around the wiring or tubing at your chosen mounting point.
3. Gently shape or twist the P-style loop by hand so the mounting hole lines up with your panel, frame, or bracket.
4. Insert a 1/4 inch (M6) screw or bolt through the mounting hole and into the mounting surface.
5. Tighten the fastener until the clamp holds the line securely, being careful not to over-compress the rubber cushion.
6. Repeat along the length of the run, spacing clamps evenly to prevent sagging or movement.

Package Contents

• 20 x TIESELX rubber cushioned stainless steel cable clamps (size as selected)

Frequently Asked Questions

What size clamp do I need?

Match the clamp’s inner diameter to the outer diameter of the wire, hose, pipe, or conduit you are securing. TIESELX offers 13 sizes ranging from 3/16 inch to 2 inch, so measure your line before ordering.

Are mounting screws included?

No. Each clamp has a standard 1/4 inch (M6) mounting hole, so you can use screws or bolts you already own or pick up hardware locally.

Can these clamps be used outdoors or in marine environments?

Yes. The 304 stainless steel body and rubber cushion lining are designed to resist rust, salt exposure, and moisture, making this pipe clamp well suited to boats, outdoor equipment, and vehicles.

Will the rubber lining damage or discolor my cables?

No. The rubber cushion is designed to protect wiring and tubing from abrasion and vibration without leaving marks under normal use.

Can I reuse these clamps?

Yes. Since the P-style band can be reshaped and the fastener removed and reinstalled, this cable holder clamp can be repositioned or reused across multiple projects.

Stainless Steel Cable Clamp Accessories and Related Guides

Pair this stainless steel cable clamp 20-pack with other TIESELX cable management and zip tie solutions to finish the job right:

• Cable Raceway Cord Cover Kit – hide the wire runs your clamps route along walls and baseboards.
• Under Desk Cable Management Tray – combine with clamps for a fully organized home office setup.
• Reusable Hook and Loop Cable Straps – bundle loose cords before securing runs with a clamp.
• 6 Inch Heavy Duty Black Zip Ties (100 Pack) – ideal for smaller bundles alongside your clamps.

Helpful Guides

• Stainless Steel Cable Ties: Complete Guide to Uses, Grades and Installation
• Under Desk Cable Management: The Complete Guide for a Tidy Workspace